Power Entry Module Filter Fast-on Terminal Power Filter Filter 10A
YB11C4
Power Entry Module Filter:
Power entry model filters with an IEC inlet, a mains filter with
dual-fuse holder and a 2-pole rocker switch. Power entry modules combine IEC inlet, RFI filtering with good
attenuation with a double pole switch in a compact metal housing
that is fit for front panel mounting.Typical applications in electrical and electronic equipment, game,
player, household equipment, medical equipment, testing and
measuring equipment.
Features Of YB11C4-10A-Q EMI Filter:
--Power entry model filters with an IEC inlet, a mains filter with
dual-fuse holder and a 2-pole rocker switch.
--The rated current can be offered up to 10 amps.
--Custom-specific versions are available on request.
Technical Specification:
1. Rated Voltage: 115/250VAC
2. Rated Currents: 1A,3A,6A,10A
3. Operating Frequency: 50/60Hz
4. Nominal Center Frequency 10K-30MHZ
5. Package Type Surface Mount
6. Hipot Rating(Line-to-Line): 1450VDC
7. Hipot Rating(Line-to-Ground): 2250VDC
8. Operating Temperature: -25 ~ +85°C
9. Safety Compliance: CE; 1 to 10A
10. Maximum Leakage Current:115VAC/50HZ 0.3uA Max
Typical Applications:
1. Portable electrical and electronic equipment;
2. Medical equipment;
3. Test and measurement equipment;
4. Small and medium-sized machines and household equipment
5. Single-phase power supply,switch-mode power supply
Filter Selection Table:
| Part No. | Case | Rated Currents (A) | Output Connections |
| YB11C1 | C1 | 1 | Fast-on terminal |
| YB11C2 | C2 | 3 |
| YB11C3 | C3 | 6 |
| YB11C4 | C4 | 10 |
YB11C4-10A-Q Picture:
Naming Rule:
| YB | 11 | C4 | - | 10A | - | Q |
| | | | | | | | | | | | |
| Our brand | Circuit | Case | | Current | | Output Connections |
| 11:11 circuit | C3: Single fuse | | 1A :1 amp | | C4:Fast-on terminal |
| | C4: Double fuse | | 3A:3 amp | | |
| | | | 6A:6 amp | | |
| | | | 10A:10amp | | |
Medical Type Tabulates:
| Model No. | Rated Current
@40°C
| Terminal Options
| Bleeder resistor (optional) | Medical equipment |
G | Leakage current 250V/50Hz | Electrical Schematic
| Rated Voltage(V) | Operating Frequency(Hz) |
|
| | |
| YB11C3-1A-x(R5) | 1A | Q | S | - | 1 | 5 | - |
<5μA | Fig.2 |
115/250V |
50/60Hz |
| YB11C3-2A-x(R5) | 2A | Q | S | - | 1 | 5 | - | Fig.2 |
| YB11C3-3A-x(R5) | 3A | Q | S | - | 1 | 5 | - | Fig.2 |
| YB11C3-4A-x(R5) | 4A | Q | S | - | 1 | 5 | - | Fig.2 |
| YB11C3-6A-x(R5) | 6A | Q | S | - | 1 | 5 | - | Fig.2 |
| YB11C3-8A-x(R5) | 8A | Q | S | - | 1 | 5 | - | Fig.2 |
| YB11C3-10A-x(R5) | 10A | Q | S | - | 1 | 5 | - | Fig.2 |
| YB11C4-1A-x(R5) | 1A | Q | S | - | 1 | 5 | - | Fig.2 |
| YB11C4-2A-x(R5) | 2A | Q | S | - | 1 | 5 | - | Fig.2 |
| YB11C4-3A-x(R5) | 3A | Q | S | - | 1 | 5 | - | Fig.2 |
| YB11C4-4A-x(R5) | 4A | Q | S | - | 1 | 5 | - | Fig.2 |
| YB11C4-6A-x(R5) | 6A | Q | S | - | 1 | 5 | - | Fig.2 |
| YB11C4-8A-x(R5) | 8A | Q | S | - | 1 | 5 | - | Fig.2 |
| YB11C4-10A-x(R5) | 10A | Q | S | - | 1 | 5 | - | Fig.2 |
*Q: Fast-on 6.35x0.8mm 
S: solder 4.0x0.8mm 
W: UL1015 18awg
Electrical Schematic:
Fig.2
Mechanical Dimension(Unit: mm)
| Case | A | B | C | D | E | F | G | H | I | J | K | L |
|
| C3/C4 | 62 | 61 | 29.5 | 80 | 72 | 35 | 11 | 11 | 17 | 3.5 | 6.35*0.8 | 46 |
|
| Tolerances | ±1 | ±1 | ±1 | ±1 | ±0.15 | ±1 | ±0.5 | ±0.5 | ±0.5 | ±1 | ±0.15 | 46 |
|
Insertion loss table(In 50ohm system according IEC/CISPR No.17)
Common mode -------- differential mode
1A 3A
6A 8A
10A
